Project " I cant get enough" - Page 2

Rebel Zuk · 07-28-2010, 10:17 PM

It is kinda pricey Mike....like we discussed today, you have shit pile of money to dump into to get it wheelable at all. You told me yourself, you were finding ready to wheel rigs with tons for 6K.... You would be better off buying a turn key rig ready to go, than build this one. Just my opinion. You still have to get axles, coilovers, t-case, gears, lockers, install kits, driveshafts, wheels, tires and various other smaller items.... Im telling you bro, if you have every listened to me or any one else,,,, Id buy a rig already built completely and ready to wheel. With the economy, people are selling rigs off left and right for way way way less than whats invested into them...And you gotta factor in the cost of going all the way to Murfreesboro TN and back to get the jeep. Just a friend offering you some advice.

Gary4 · 07-28-2010, 10:21 PM

they know what they say, they know what they say

Gary4 · 07-28-2010, 10:22 PM

i don't know nothin bout birthin no baby

jeepNfool · 07-29-2010, 03:44 AM

I am not paying 3800 for it. We agreed on a lower price. Also, If you read everything that is on it, 3800 would not have been that pricey at all. Hell, If you build a buggy, the Tubing for that would be half that cost. Then you have to factor in all the other stuff. Guages, heims, seats, skins if you want em, fuel tank, wiring, and then your labor. I am sure I am forgetting something that is included. This fits in what I can afford at the moment. I can then buy what is needed piece by piece when money comes in. Like they say, beauty is in the eyes of the beholder.

jeepNfool · 07-31-2010, 01:53 PM

Well got my jeep picked up and we are heade still eved back. This thing still has the dang hydraulic steering lines and all fuel lines ont it. This is literally going to be throw in the drivetrain and roll. I didnt get to meet Adam Woodlee, but I met his dad and he was very cool.

jeepNfool · 08-06-2010, 05:08 PM

Might have to rename this slow build II

jeepNfool · 08-08-2010, 07:21 AM

Well, gonna be going with front and rear steer rockwells again lol.....

jeepNfool · 08-12-2010, 07:41 AM

Leaving in 20 mins to get my new axles

jeepNfool · 08-12-2010, 05:45 PM

Well, I am back with my axles. Pete has a very nice home!!!!

Rugger99 · 08-12-2010, 06:46 PM

Did you go with Rockwells or 60/14b combo ?

07-28-2010, 10:17 PM	#11
Rebel Zuk Mud Slinger Join Date: Dec 1969 Location: Crestview FL Posts: 1,268 View My Homepage	It is kinda pricey Mike....like we discussed today, you have shit pile of money to dump into to get it wheelable at all. You told me yourself, you were finding ready to wheel rigs with tons for 6K.... You would be better off buying a turn key rig ready to go, than build this one. Just my opinion. You still have to get axles, coilovers, t-case, gears, lockers, install kits, driveshafts, wheels, tires and various other smaller items.... Im telling you bro, if you have every listened to me or any one else,,,, Id buy a rig already built completely and ready to wheel. With the economy, people are selling rigs off left and right for way way way less than whats invested into them...And you gotta factor in the cost of going all the way to Murfreesboro TN and back to get the jeep. Just a friend offering you some advice. __________________ Morris Mountain ORV AL X8 Gray Rock ORV AL X5 Tellico ORV NC/TN X1 Wind Rock ORV TN X1 River Rock ORV GA X1 XRRA Event @ Grey Rock ORV AL X1

07-28-2010, 10:21 PM	#12
Gary4 Administrator Join Date: Dec 1969 Location: I move alot Posts: 1,527	they know what they say, they know what they say __________________ If It Ain't Broke, It Will Be

07-28-2010, 10:22 PM	#13
Gary4 Administrator Join Date: Dec 1969 Location: I move alot Posts: 1,527	i don't know nothin bout birthin no baby __________________ If It Ain't Broke, It Will Be

07-29-2010, 03:44 AM	#14
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	I am not paying 3800 for it. We agreed on a lower price. Also, If you read everything that is on it, 3800 would not have been that pricey at all. Hell, If you build a buggy, the Tubing for that would be half that cost. Then you have to factor in all the other stuff. Guages, heims, seats, skins if you want em, fuel tank, wiring, and then your labor. I am sure I am forgetting something that is included. This fits in what I can afford at the moment. I can then buy what is needed piece by piece when money comes in. Like they say, beauty is in the eyes of the beholder. __________________ Heroes never die, they just reload! D:

07-31-2010, 01:53 PM	#15
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	Well got my jeep picked up and we are heade still eved back. This thing still has the dang hydraulic steering lines and all fuel lines ont it. This is literally going to be throw in the drivetrain and roll. I didnt get to meet Adam Woodlee, but I met his dad and he was very cool. __________________ Heroes never die, they just reload! D:

08-06-2010, 05:08 PM	#16
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	Might have to rename this slow build II __________________ Heroes never die, they just reload! D:

08-08-2010, 07:21 AM	#17
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	Well, gonna be going with front and rear steer rockwells again lol..... __________________ Heroes never die, they just reload! D:

08-12-2010, 07:41 AM	#18
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	Leaving in 20 mins to get my new axles __________________ Heroes never die, they just reload! D:

08-12-2010, 05:45 PM	#19
jeepNfool Senior Member Join Date: Dec 1969 Posts: 645	Well, I am back with my axles. Pete has a very nice home!!!! __________________ Heroes never die, they just reload! D:

08-12-2010, 06:46 PM	#20
Rugger99 Administrator Join Date: Dec 1969 Location: Hunting Dirtbags Posts: 449	Did you go with Rockwells or 60/14b combo ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links